Инструкции Пользователя для Brother NC21SE
SEWING THE STITCHES
Ut
ili
ili
ty Stit
ch
es
es
111
3
Zipper Insertion
■ Centered Zipper
Use for bags and other such applications.
a
a
a
a
Select .
b
b
b
b
Attach presser foot “J” and sew straight
stitches up to the zipper opening. Change to
a basting stitch (see page 67) and sew to the
top of the fabric.
stitches up to the zipper opening. Change to
a basting stitch (see page 67) and sew to the
top of the fabric.
a Basting stitches
b Reverse stitches
c End of zipper opening
d Wrong side
d Wrong side
c
c
c
c
Press the seam allowance open and attach
the zipper with a basting stitch in the
middle of each side of the zipper tape.
the zipper with a basting stitch in the
middle of each side of the zipper tape.
a Basting stitches
b Zipper
b Zipper
c Wrong side
d
d
d
d
Remove presser foot “J”. Align the right
side of the pin in zipper foot “I” with the
presser foot holder, and attach the zipper
foot.
side of the pin in zipper foot “I” with the
presser foot holder, and attach the zipper
foot.
a Right
b Left
b Left
c Needle drop position
e
e
e
e
Topstitch 7 to 10 mm (approx. 1/4 to
3/8 inch) from the seamed edge of the
fabric, then remove the basting.
3/8 inch) from the seamed edge of the
fabric, then remove the basting.
Memo
• For details on each stitch, refer to the
“STITCH SETTING CHART” at the end of
this manual.
this manual.
Note
• Make sure you sew using the middle needle
position.
a
b
c
d
CAUTION
• When using zipper foot “I”, make sure the
straight stitch, middle needle position is
selected. Turn the handwheel to make sure the
needle does not strike the presser foot. If
another stitch is selected, the needle will strike
the presser foot, causing the needle to break
and possibly causing injury.
selected. Turn the handwheel to make sure the
needle does not strike the presser foot. If
another stitch is selected, the needle will strike
the presser foot, causing the needle to break
and possibly causing injury.
c
a
c
b
b
c
a