Справочник Пользователя для Brother NV1200
192
APPENDIX
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Upgrading Your Machine’s Software
You can use a computer to download software upgrades for your sewing machine.
Memo
z While the software is being upgraded, the buzzer will not sound when a key is pressed.
a
While holding
(Settings key) pressed,
turn on the machine.
X
The following screen appears.
b
Plug the USB cable connectors into the
corresponding USB ports on the computer and
on the machine.
corresponding USB ports on the computer and
on the machine.
X
The “Removable Disk” icon appears in “My
Computer” on the computer.
Computer” on the computer.
c
Copy the upgrade file to “Removable Disk”.
X
The message “Connected to PC. Do not
disconnect the USB cable.” appears.
disconnect the USB cable.” appears.
d
When the screen shown in step
a
appears
again, press
.
X
The message “Saving the upgrade file. Do
not turn main power to OFF.” appears.
not turn main power to OFF.” appears.
e
When the following screen appears, upgrading
is completed.
If there are two upgrade files, download the
second file. Repeat steps
is completed.
If there are two upgrade files, download the
second file. Repeat steps
c
through
e
.
Note
z If an error occurred, an error message
appears. At this time, turn the machine off,
and then start the procedure again from step
and then start the procedure again from step
a
.
f
Disconnect the USB cable, and turn the
machine off, then on again.
machine off, then on again.