Справочник Пользователя для Brother NV1200
SEWING BASICS
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
52
b
Insert the foot controller plug into its jack on
the right side of the sewing machine.
the right side of the sewing machine.
a Foot controller jack
Note
(For U.S.A. only)
z Foot controller: Model T
This foot controller can be used on this
machine model NV1200.
machine model NV1200.
c
Turn on the sewing machine.
d
Slide the sewing speed controller to the left or
right to select the foot controller's maximum
sewing speed.
Slide the sewing speed controller to the left to
select a lower maximum sewing speed, or slide
the speed controller to the right to select a
higher maximum sewing speed.
right to select the foot controller's maximum
sewing speed.
Slide the sewing speed controller to the left to
select a lower maximum sewing speed, or slide
the speed controller to the right to select a
higher maximum sewing speed.
a Sewing speed controller
e
Once you are ready to start sewing, slowly
press down on the foot controller.
Pressing down on the foot controller increases
the sewing speed; releasing the pressure on the
foot controller decreases the sewing speed.
press down on the foot controller.
Pressing down on the foot controller increases
the sewing speed; releasing the pressure on the
foot controller decreases the sewing speed.
• Slowly press down on the foot controller.
Pressing it down hard starts sewing too
quickly.
quickly.
X
The machine starts sewing.
f
When the end of the stitching is reached,
completely release the foot controller.
completely release the foot controller.
X
The machine stops sewing with the needle
lowered (in the fabric).
lowered (in the fabric).
g
When you have finished sewing, press
(Needle position button).
X
The needle is raised.
h
Cut the threads.
• For details, refer to “Cutting the thread” (page
54).
Memo
z When the foot controller is plugged in,
(Start/stop button) cannot be used to start or
stop sewing.
stop sewing.
z When sewing is stopped, the needle remains
lowered (in the fabric). The machine can be
set so that the needle will stay up when
sewing is stopped. For details on setting the
machine so that the needle stays up when
sewing is stopped, refer to “Changing the
machine settings” (page 19).
set so that the needle will stay up when
sewing is stopped. For details on setting the
machine so that the needle stays up when
sewing is stopped, refer to “Changing the
machine settings” (page 19).
CAUTION
1
1
● Do not allow thread or dust to accumulate
in the foot controller, otherwise a fire or
an electric shock may occur.
an electric shock may occur.
● Do not place objects on the foot
controller, otherwise damage to the
machine or injuries may occur.
machine or injuries may occur.
● If the machine is not to be used for a long
period of time, unplug the foot controller,
otherwise a fire or an electric shock may
occur.
otherwise a fire or an electric shock may
occur.
Slower
Faster