Справочник Пользователя для Brother LK3-B448E
LK3-B448E MARK
II
/BA-16
26
5. Operation
5-2 . Operating procedure
Program No.
X-scale (%)
Y-scale (%)
Speed (rpm)
Factory default
00 *
100
100
2000
Variable range
01 - 49
20 - 200
20 - 200
1,000 - 2,500
S E L E C T
PROGRAM NO.
COUNTER
X-SCALE
Y-SCALE
SPEED
P
S E L E C T
PROGRAM NO.
COUNTER
X-SCALE
Y-SCALE
SPEED
P
S E L E C T
PROGRAM NO.
COUNTER
X-SCALE
Y-SCALE
SPEED
P
Press the SELECT switch
y
until the PROGRAM NO. in-
dicator illuminates.
dicator illuminates.
Press the DISPLAY SET
switches
switches
!2
until the desired
program number is flashing in
the display window.
the display window.
Depress the foot switch to the
second step.
second step.
* The display will stop flashing and
illuminates steadily, and the feed
mechanism will move to the sew-
ing start position.
mechanism will move to the sew-
ing start position.
This completes the setting of the program
number.
number.
1
2
3
Press the SELECT switch
y
until the X-scale or Y-scale
indicator illuminates.
indicator illuminates.
Press the DISPLAY SET
switches
switches
!2
until the desired
scale setting is flashing in the
display window.
display window.
(The setting is
displayed as a percentage.)
Depress the foot switch to the
second step.
second step.
* The display will stop flashing and
illuminates steadily, and the feed
mechanism will move to the sew-
ing start position.
mechanism will move to the sew-
ing start position.
1
2
3
Press the SELECT switch
y
until the SPEED indicator il-
luminates.
luminates.
Press the DISPLAY SET
switches
switches
!2
until the de-
sired speed setting is flashing
in the display window.
in the display window.
1
2
This completes the setting of the X-scale
or Y-scale.
or Y-scale.
y
y
y
!2
!2
1st step
2nd step
Preparation
Turn on the power switch.
(The POWER indicator
Turn on the power switch.
(The POWER indicator
q
will illuminate and the pro-
gram number will flash in the display window
!44
.)
* For checking the origin points for X and Y feed
5-2-1 . Setting the program number
Determine the appropriate program from the program list which is given on pp. 3 - 5.
5-2-2 . Setting the X-scale and Y-scale
5-2-3 . Setting the sewing speed
1st step
2nd step
NOTE:
Be sure to check the sewing pattern (refer to page 20) after setting has been completed to make sure that the needle drops
down into the hole of the button.
down into the hole of the button.
!2