Справочник Пользователя для Brother KE-430FX

 

 

40

KE-430FX/KE-430FS, BE-438FX 

To create a program with parameters that are almost exactly the same as those of another program, you can copy the original 
program and change just the parts which need to be changed.   
 

Select the program number to be used for creating 
the new program.   
 

 

 

Carry out steps 1 and 2 in “5-2. Program setting method” 
to select the program number to be used for creating the 
new program.   
 
 
 
 

• 

Select a program number from 200 to 999.   

 

 

While pressing the F1 key (1), press the F4 key (2).   
 
 
 

• 

 “CoPy” will be displayed in the menu display, “PG” 
will be displayed in the SECTION No. display, and the 
number of the program containing the original data will 
be displayed in the TENSION display. 

• 

The displays will not appear in this way unless a 
program number from 200 to 999 has been selected 
as the new program number.   

Select the program containing the original data. 
 

Press the 

 or 

  key (3) to change the number of 

the program containing the original data.   
 
 
 
 

• 

The value in the TENSION display will flash.   

• 

If you press the RESET key, you can cancel the copy 
operation and return to program mode.     

Copy the program.   
 

 

Press the ENTER key.   
 

 

• 

All parameters in the program will be copied, and the 
sewing machine will then return to the status in step 3 
of “5-2. Program setting method”.   

Change the necessary parameters.   

Carry out the steps from step 4 onward in “5-2. Program 
setting method” to change the necessary parameters.   

2410B

For example, to create   
program number 300: 

2411B

2412B

2413B

2382B  2383B

2414B

For example, to copy   
program number 12: