Справочник Пользователя для Brother KE-430FX

 

 

56

KE-430FX/KE-430FS, BE-438FX

“X-scale”, “Y-scale” and “Sewing speed” can be changed even during sewing standby.   

The changes made at this time will be reflected in the program, so this is a useful way of changing programs while checking 

actual sewing.   

 

 
1. Press the SELECT key (1) so that the X-SCALE 

indicator (2) (for X-scale setting) or the Y-SCALE 
indicator (3) (for Y-scale setting) is illuminated. 
・ 

The setting value (%) will be displayed in the menu 
display (4). 

2. Press the   or    key (5) to set the scale (20 - 200). 

・ 

The program number in the PROGRAM No. display 
(6) will flash.   

3.  Depress the foot switch to the 2nd step. 

・ 

The work clamp will move to the sewing start 
position and the program number will change from 
flashing to illuminated.   

Once the setting is complete, be sure to carry out the 
steps in "5-4./5-5. Checking the sewing pattern" to check 
that the needle drop position is correct. 

<Changing the sewing speed> 

 
1.  Press the SELECT key (1) so that the SPEED indicator 

(2) is illuminated.   
・ 

The setting value (sti/min) will be displayed in the 
menu display (3). 

2. Press the   or    key (4) to set the sewing speed. 

(Sewing speed values: KE-430FX･ FS: 200 to 3200; 
BE-438FX: 200 to 2700) 
 
 
 
 
 
 
 
 
 
 
 

<Changing slow start pattern> 

* This setting cannot be made when memory switch No. 

100 is set to “OFF”. 

 
1. While the SPEED indicator (1) is illuminated and the 

sewing speed is being displayed in the menu display (2), 

press the SELECT key (3).   

• The setting value will be displayed in the menu display 

(2).  

2. Press the   or    key (4) to set the slow start pattern.   

* Refer to the list of parameters in “5-2. Program setting 

method”. 

 
 
 
 
 
 

 

 

2450B

2451B

2460B