Справочник Пользователя для Brother DH4-B980

7. SEWING

RH-9800

30

7. SEWING

Make sure you know where the EMENRGENCY STOP switch is and how it is used before operating the sewing
machine.

7-1. Using the EMERGENCY STOP switch

In automatic mode

1. Press the EMERGENCY STOP switch (1).

*  All machine operations will stop and the buzzer will sound. The TROUBLE indicator will illuminate and "E-60" will

appear on the front panel display at this time.

2. Eliminate the cause of the problem.

*  The machine will not always stop in the needle up position if the EMERGENCY STOP switch (1) is pressed during

sewing.
Turn the upper shaft pulley by hand to raise the needle to the needle up position (so that the marks are aligned).

* The feed bracket (2) can be moved back and forth at this time by pressing the "up" button (L) and "Down" button

(K).

3. To continue sewing, press the start switch (3).

*  The TROUBLE indicator will switch off, the "E-60" will be cleared from the front panel display and sewing will begin

again.
To stop sewing, press the RESET button (4).

*  The TROUBLE indicator will switch off, the "E-60" will be cleared from the front panel display and the feed bracket

will return to the cloth setting position.

In manual mode or in automatic mode

1. Press the EMERGENCY STOP switch (1).

*  All machine operations will stop and the buzzer will sound. The TROUBLE indicator will illuminate and "E-60" will

appear on the front panel display at this time.

2. Eliminate the cause of the problem.
3. Press the RESET button (4).

*  The TROUBLE indicator will switch off, the "E-60" error code will be cleared from the front panel display and the

feed bracket will return to the cloth setting position.

1161Q

1163Q

1162Q

(4)

(L)

(K)

(1)

(2)

(3)