Справочник Пользователя для Brother Computerized Sewing and Quilting Machine

10

a Buttonhole lever

Lower the buttonhole lever when sewing buttonholes and bar 
tacks.

b Presser foot holder

The presser foot is attached to the presser foot holder.

c Presser foot holder screw

Use the presser foot holder screw to hold the presser foot 
holder in place.

d Presser foot

The presser foot consistently applies pressure to the fabric as it 
is sewn. Attach the appropriate presser foot for the selected 
stitch.

e Feed dogs

The feed dogs feed the fabric in the sewing direction.

f Bobbin cover

Open the bobbin cover to insert the bobbin.

g Needle plate cover

Remove the needle plate cover to clean the bobbin case and 
race.

h Needle plate

The needle plate is marked with guides to help sew straight 
seams.

i Needle bar thread guide

Pass the upper thread through the needle bar thread guide.

j Needle clamp screw

Use the needle clamp screw to hold the needle in place.

The measurements on the needle plate and bobbin 
cover are references for patterns with a middle 
(center) needle position. The measurements on the 
needle plate cover is a reference for stitches with a 
left needle position.

a For stitches with a middle (center) needle position
b For stitches with a left needle position

c Middle (center) needle position <inch>
d Middle (center) needle position <cm>
e Middle (center) needle position <inch>

f Left needle position <inch>

a

b

c

d

e

f