Справочник Пользователя для Brother Computerized Sewing and Quilting Machine
SELECTING A UTILITY STITCH
U
tili
ty
ty
S
tit
ch
es
53
3
Selecting a Stitch
a
Turn on the machine, and then lightly press
the display.
the display.
→ Depending on the setting, either “Q-01 Piecing
stitch (Middle)”, “1-01 Straight stitch (Left)” or “1-03
Straight stitch (Middle)” is automatically selected.
Straight stitch (Middle)” is automatically selected.
b
Press
to display a screen
of the stitches in the selected category, and
then select a stitch.
then select a stitch.
→ An image of the selected stitch is displayed below
the symbol of the appropriate presser foot.
■ Using the Mirror Image Key
Press
so that it appears as
. A mirror
image of the selected stitch is created.
Saving Stitch Settings
This machine is preset with the default settings for the
stitch width (zigzag width), stitch length, thread tension,
automatic thread cutting, automatic reverse/
reinforcement stitching, etc. However, if you wish to
save specific settings for a stitch so that they can be
stitch width (zigzag width), stitch length, thread tension,
automatic thread cutting, automatic reverse/
reinforcement stitching, etc. However, if you wish to
save specific settings for a stitch so that they can be
used later, press
after changing the settings to
save the new settings with the selected stitch.
Example:
Using a stitch length of 2.0 mm for the
straight stitch
straight stitch
a
Press
, and then select a straight stitch.
b
Set the stitch length to 2.0 mm.
c
Press .
* To reset the selected stitch to its default settings,
press
, and then press
.
Memo
For details on the stitches, refer to “STITCH SETTING
CHART” at the end of this manual.
CHART” at the end of this manual.
Note
If
appears as
after a stitch (buttonholes,
multi-directional sewing patterns, etc.) is selected, a
mirror image of the selected stitch cannot be created.
mirror image of the selected stitch cannot be created.
Memo
The default stitch length is 2.5 mm.