Справочник Пользователя для Brother Computerized Sewing and Quilting Machine
SEWING THE STITCHES
U
tili
ty
ty
S
tit
ch
es
69
3
c
Sew while lightly guiding the fabric.
d
End the basting with reinforcement stitches.
Darts Seams
a
Press
, and then attach presser foot “J”.
b
Press the “Reverse/Reinforcement Stitch”
button to sew reverse stitches at the
beginning of the stitching, and then sew from
the wide end to the narrow end without
stretching the fabric.
button to sew reverse stitches at the
beginning of the stitching, and then sew from
the wide end to the narrow end without
stretching the fabric.
* If the automatic reverse/reinforcement stitching
setting is selected before sewing, reverse stitches
will be sewn at the beginning of the stitching.
will be sewn at the beginning of the stitching.
a Basting
c
Without sewing reverse stitches at the end of
the stitching, pull out 50 mm (approx. 1-15/
16 inches) of the threads, cut them, and then
tie the two ends together.
the stitching, pull out 50 mm (approx. 1-15/
16 inches) of the threads, cut them, and then
tie the two ends together.
d
Insert the ends of the thread into the dart
with a sewing needle.
with a sewing needle.
e
Iron the dart to one side.
Memo
This is easy to do if the foot controller is used
(see page 41).
(see page 41).
a