Справочник Пользователя для Brother Computerized Embroidery Machine
Attaching the Embroidery Foot 73
3
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
f
Secure the embroidery foot with the presser
foot holder screw.
Set the embroidery foot perpendicular.
foot holder screw.
Set the embroidery foot perpendicular.
g
Firmly tighten the presser foot holder screw.
Turn the screwdriver toward the front.
Turn the screwdriver toward the front.
CAUTION
● Do not hit the needle with your finger or
the embroidery foot when attaching it.
The needle may break or cause injury.
The needle may break or cause injury.
● Be sure to tighten the screw with the
included screwdriver. If the screw is
loose, the needle may hit the embroidery
foot and break or bend.
loose, the needle may hit the embroidery
foot and break or bend.
● Before embroidering, always turn the
handwheel toward you
(counterclockwise) slowly to make sure
that the needle does not hit the
embroidery foot. Otherwise, the needle
may break or bend.
(counterclockwise) slowly to make sure
that the needle does not hit the
embroidery foot. Otherwise, the needle
may break or bend.
F-combo-BrotherE_sgml.book Page 73 Thursday, November 17, 2005 3:39 PM