Справочник Пользователя для Brother BES-941BC
Chapter 6 Operation of Machine
BES-941BC • BES-1241BC
124
1. Operating Procedures
1-1 Power Source
1.
Turn the power on to the machine.
2.
Reset the emergency stop button.
3.
Press the power switch.
4.
A message is displayed on the LCD.
• The alarm sounds three times and the
needle bar and the presser foot move
upward. Then the hoop moves to the zero
point and the sewing data screen is
displayed.
upward. Then the hoop moves to the zero
point and the sewing data screen is
displayed.
Note) When turning the power off and back it on
again, wait for at least 10 seconds.
1-2 Preparation for Embroidering
• Select embroidering data.
• Using the jog switches (
), determine a position to start embroidering.
Note) An error message is displayed on the LCD if a pattern comes out of the hoop.
• Pressing
starts embroidering.
• After embroidering is finished, the machine is placed in the stand-by state.
Emergency stop switch
Power switch