Справочник Пользователя для Brother BES-941BC
Chapter 8 Standard Adjustment
BES-941BC • BES-1241BC
155
6.
After timing adjustment the is finished for
each head, set the pulley B
each head, set the pulley B
q
to the stop
position (at 100˚ of the scale) and press
E S C
E S C
. The machine enters the standby
state.
The adjustment of the rotary hook is
completed and the timing is stored. The
rotary hook returns to the stop position
accordingly.
completed and the timing is stored. The
rotary hook returns to the stop position
accordingly.
5. Adjustment of Presser Foot Height
1.
Turn the power switch off.
2.
Select the needle bar No. 1.
3.
Loosen the screw
w
of the presser foot
q
, and adjust the presser foot
q
until it comes
above the cloth top surface when it is at the alignment position (where the pulley B indication
mark " " and the cover indication mark " " are aligned).
mark " " and the cover indication mark " " are aligned).
w
q
material