Справочник Пользователя для Brother Basic Sewing and Mending Machine
KNOWING YOUR SEWING MACHINE —————————————————————————————————————————
13
Upper threading
Set the upper thread and thread the needle.
a Spool pin
b Thread guide (rear)
c Thread guide (front)
d Thread take-up lever
b Thread guide (rear)
c Thread guide (front)
d Thread take-up lever
a
Raise the presser foot using the presser foot
lever.
lever.
a Presser foot lever
b
Raise the needle by turning the handwheel
toward you (counterclockwise) to raise the
thread take-up lever to its highest position.
toward you (counterclockwise) to raise the
thread take-up lever to its highest position.
• If the needle is not correctly raised, the
sewing machine can not be threaded. Be
sure to turn the handwheel before threading
the sewing machine.
sure to turn the handwheel before threading
the sewing machine.
c
Pull up the spool pin as far as possible, and
then put a spool of thread on this pin.
then put a spool of thread on this pin.
d
Feed the upper thread through both thread
guides: the rear one first, then the front one.
guides: the rear one first, then the front one.
e
Pull the thread down and around the upper
tension control dial from the right to the left
so the thread picks up the thread check
spring.
tension control dial from the right to the left
so the thread picks up the thread check
spring.
a Upper tension control dial
b Thread check spring
b Thread check spring
● Make sure you thread the machine properly. Otherwise, the thread could tangle and break the needle.
CAUTION
● If the spool of thread is in the wrong place, or
is set incorrectly, the thread may tangle on
the spool pin and cause the needle to break.
the spool pin and cause the needle to break.
CAUTION