Справочник Пользователя для Brother 885-X03/X13/X23

USING ATTACHMENTS AND APPLICATIONS

—

Gathering

Loosen the tension of the upper thread so
that the lower thread lies on the underside
of the material.

Sew a single row (or many rows) of
straight stitches.

Pull the lower threads to gather the
material.

Darning

Turn off the machine.
Place the darning plate on the needle
plate, then turn on the machine.

Either remove both the presser foot and
presser foot holder assembly and then
lower the presser foot lever.

Put the section you want to darn under
the presser foot together with fabric for
reinforcement.

Turn on the machine.

Begin sewing by alternating between
gently drawing the work away from you
and pulling it toward you.

Note

● Sew while holding the fabric stretched in

order to keep the fabric held down.

Repeat this motion until the section being
darned is filled with parallel lines of
stitching.

Appliqués

You can create an appliqué by cutting a different piece
of fabric into a shape and applying it as a decoration.

Stitch Name

Pattern

Stitch Length

[mm (inch)]

Straight Stitch

(Left Needle Position)

4 (3/16)

Straight Stitch

(Center Needle

Position)

4 (3/16)

Stitch Name

Pattern

Stitch

Length

[mm (inch)]

Other

Straight Stitch

(Left Needle

Position)

Any

Darning

Plate

Straight Stitch

(Center Needle

Position)

Any

Darning

Plate

Stitch Name

Pattern

Stitch

Length

[mm (inch)]

Stitch Width

[mm (inch)]

Zigzag Stitch

F-2

(1/64-1/16)

1.5 (1/16)

Zigzag Stitch

F-2

(1/64-1/16)

3.5 (1/8)

Zigzag Stitch

F-2

(1/64-1/16)

5 (3/16)