Справочник Пользователя для Brother 885-V35/V37
184
APPENDIX
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
27
When the embroidery unit is attached.
28
You tried to set a number of characters that will not fit within the frame.
29
The upper thread has become tangled around the bobbin case, and the
needle is bent and hitting the needle plate, etc., so the sewing machine
stops (refer to page 176).
30
You tried to use a function that cannot be used when the embroidery
unit is attached.
31
An Embroidery Memory Card that may not compatible with your
machine has been inserted.
machine has been inserted.
• Certain licensed designs cannot be read by this machine.
• Designs in an unacceptable card format cannot be read by this
• Designs in an unacceptable card format cannot be read by this
machine.
• Design data saved in a hoop size not compatible with your machine
has been selected.
32
The utility stitch key or the reverse/reinforcement stitch button was
pressed while the embroidery unit is attached.
pressed while the embroidery unit is attached.
33
You try to retrieve a pattern downloaded as one for a different machine.
34
The start/stop button, the embroidery key, or the memory key is pressed
in embroidery mode, but the embroidery unit is not attached.
The embroidery key was pressed when the embroidery unit is not
attached.
35
The bobbin winder is winding the bobbin.
No
Error Message
Probable Cause