Справочник Пользователя для Brother 885-V12/V13

Скачать
Страница из 116
SEWING BASICS ———————————————————————————————————————————————————————————————————————————————————————————————————————
48
Cutting the thread
a
When you wish to finish the stitching and the 
sewing machine is stopped, press 
 (needle 
position button) once to raise the needle.
a Needle position button
X
The needle is raised.
b
Raise the presser foot lever.
a Presser foot lever
c
Pull the fabric to the left side of the machine, 
and then pass the threads through the thread 
cutter to cut them.
a Thread cutter
Automatically sewing reverse/
reinforcement stitches
The sewing machine can be set to automatically sew 
reverse or reinforcement stitches at the beginning 
and end of the stitching. With straight stitches and 
zigzag stitches, reverse stitches, not reinforcement 
stitches, are automatically sewn.
a
Select a stitch.
• For details, refer to “Selecting a stitch” 
(page 42).
b
Press  
(automatic 
reverse/reinforcement 
stitch key).
a Automatic reverse/reinforcement stitch key
X
 appears in the LCD.
• This step is not necessary if a stitch such as 
those for sewing buttonholes and bar tacks is 
selected where reinforcement stitches are 
automatically sewn.
• Press  
(automatic 
reverse/reinforcement 
stitch key) again to cancel automatic reverse/
reinforcement stitching.
c
Position the fabric under the presser foot, and 
turn the handwheel toward you to insert the 
needle into the fabric.
d
Press 
 (start/stop button) once.
a Start/stop button
X
After reverse/reinforcement stitches are 
sewn, the machine starts sewing.
a
a