Справочник Пользователя для Brother 885-V12/V13
UTILITY STITCHES ————————————————————————————————————————————————————————————————————
82
Scallop stitching
The wave-shaped repeating pattern that looks like
shells is called “scalloping”. It is used on the collars
of blouses and to decorate the edges of
handkerchiefs.
shells is called “scalloping”. It is used on the collars
of blouses and to decorate the edges of
handkerchiefs.
a
Turn on the machine.
b
Select stitch
.
c
Attach monogramming foot “N”.
d
Stitch along the edge of the fabric, making
sure not to sew directly on the edge of the
fabric.
sure not to sew directly on the edge of the
fabric.
• For better results, apply spray starch onto the
fabric and press with a hot iron before it is
sewn.
sewn.
e
Trim along the stitches.
• Be careful not to cut the stitches.
Smocking
The decorative stitch created by stitching or
embroidering over gathers is called “smocking”. It is
used to decorate the front of blouses or cuffs.
The smocking stitch adds texture and elasticity to
fabric.
embroidering over gathers is called “smocking”. It is
used to decorate the front of blouses or cuffs.
The smocking stitch adds texture and elasticity to
fabric.
a
Turn on the machine.
b
Select the straight stitch, and then adjust the
stitch length to 4.0 mm (3/16 inch) and loosen
the thread tension.
• For details, refer to “Selecting a stitch”
stitch length to 4.0 mm (3/16 inch) and loosen
the thread tension.
• For details, refer to “Selecting a stitch”
(page 42) and “Adjusting the thread tension”
(page 49).
(page 49).
c
Attach zigzag foot “J”.
d
Sew parallel stitching at intervals of 1 cm (3/8
inch).
inch).
a 1 cm (3/8 inch)
• Do not sew reverse/reinforcement stitches or
• Do not sew reverse/reinforcement stitches or
cut the thread.
e
Pull the bobbin threads to create gathers.
Smooth the gathers by ironing them.
Smooth the gathers by ironing them.
f
Select stitch
or
.
g
Stitch between the straight stitches.
1