Краткое Руководство По Установке для Brother 885-S25/S27
SEWING BUTTONHOLES AND BUTTONS ————————————————————————————————————————————
36
Sewing Buttons
1
Measure the distance between the
buttonholes and set the pattern selection dial
to the Zigzag Stitch, and set the width you
want.
buttonholes and set the pattern selection dial
to the Zigzag Stitch, and set the width you
want.
2
Remove the power supply plug from the
outlet.
outlet.
3
Change the foot to the button sewing foot.
4
Place the darning plate on the needle plate.
5
Connect the power supply plug into the wall
outlet.
outlet.
6
Put a button between the foot and the fabric
and make sure that the needle enters the holes
without hitting the button. If it hits, see step
and make sure that the needle enters the holes
without hitting the button. If it hits, see step
1
.
7
At a slow speed, sew about 10 stitches.
8
Remove the material from the machine. Cut
the upper and lower threads and tie both
threads at the back of the material.
the upper and lower threads and tie both
threads at the back of the material.
Stitch
Name Pattern
Stitch
Length
[mm (inch)]
Stitch
Width
[mm (inch)]
Foot
Other
Zigzag
Stitch
F
(1/64)
Any
Button
Sewing
Foot
Darning
Plate
●
Make sure the needle does not hit the
button during sewing. The needle may
break and you may be injured.
button during sewing. The needle may
break and you may be injured.
CAUTION
XL2600.book Page 36 Thursday, November 4, 2004 9:46 PM