Справочник Пользователя для Brother 884-T09
EMBROIDERING TUTORIAL —————————————————————————————————————————————————————————————————
50
2
Move the left arm to align the screw on the
right side with the mark for the embroidery
frame to be installed, and then tighten the
thumb screws.
For this example, align with mark 4.
right side with the mark for the embroidery
frame to be installed, and then tighten the
thumb screws.
For this example, align with mark 4.
1 Mark for extra-large embroidery frame
2 Mark for large embroidery frame
3 Mark for medium embroidery frame
4 Mark for small embroidery frame
5 Align the screw with the mark.
2 Mark for large embroidery frame
3 Mark for medium embroidery frame
4 Mark for small embroidery frame
5 Align the screw with the mark.
Note
● Please firmly tighten the two thumb screws
with included disc-shaped screwdriver. The
machine will recognize the wrong frame
size, if the two screws are not tightened.
machine will recognize the wrong frame
size, if the two screws are not tightened.
X
The embroidery frame holder is ready for
the embroidery frame to be attached.
the embroidery frame to be attached.
3
Hold the embroidery frame level, and then
simultaneously align both the left and right
mounts with the embroidery frame holder
clips.
simultaneously align both the left and right
mounts with the embroidery frame holder
clips.
• The inner frame should be on top.
Note
● If the outer frame is on top, as shown
below, the embroidery frame is incorrectly
attached.
attached.
4
Insert the embroidery frame until it snaps
into place.
into place.
1 Make sure that the pins on the left and right arms
of the embroidery frame holder fit into the
positioning slot and hole on the embroidery
frame.
positioning slot and hole on the embroidery
frame.