Справочник Пользователя для Brother 882-W02

Скачать
Страница из 376
SEWING THE STITCHES
U
tili
ty
 S
tit
ch
es
107
3
h
Press 
 to cancel the free motion sewing 
mode.
→ Rotate the handwheel toward you 
(counterclockwise) to raise the feed dogs.
i
After sewing, make sure to remove the 
straight stitch needle plate and presser foot 
“C”, and reinstall the regular needle plate 
and the needle plate cover.
Using free motion Open Toe Quilting Foot “O”
The free motion open toe quilting foot “O” is used 
for free motion quilting with zigzag or decorative 
stitches or for free motion quilting of straight lines on 
fabric with an uneven thickness. Various stitches 
can be sewn using free motion open toe quilting foot 
“O”. For details on the stitches that can be used, 
refer to the “STITCH SETTING CHART” at the end of 
this manual.
Free motion open toe quilting foot “O”
a
Press 
 to set the machine to free motion 
sewing mode.
→ The key appears as 
, the quilting foot is raised 
to the necessary height, and then the feed dogs are 
lowered for free motion sewing.
Note
• Free motion open toe quilting foot “O” can 
also be used with the straight stitch needle 
plate. We recommend using free motion 
open toe quilting foot “O” with free motion 
sewing of fabrics of uneven thicknesses.
• When using the straight stitch needle plate, 
all straight stitches become middle needle 
position stitches. You cannot change the 
needle position using the width display.
Memo
• Normally, the feed dogs are raised for 
regular sewing.
• Do not be discouraged with your initial 
results. The technique requires practice.
Memo
• In order to sew with a balanced tension, it 
may be necessary to adjust the upper thread 
tension (see page 67). Test with a sample 
piece of quilting fabric.