Справочник Пользователя для Brother 882-W02

SEWING THE STITCHES

116

Crazy Quilting

For a decorative look called “Crazy Quilting”, the
following stitches can be sewn on top of a pressed
seam allowance.

Select a straight stitch and attach presser
foot “J”.

With the right sides facing each other, sew
two pieces of fabric together, and then
press open the seam allowance.

a Straight stitch
b Seam margins

c 6.5 mm (approx. 1/4 inch)
d Wrong side

Select a stitch for top stitching.

Place the fabric right side up in the
machine, and center the presser foot over
the seam when sewing.

a Right side of fabric

Smocking Stitches

Use smocking stitches for decorative sewing on
clothes, etc.

Select a straight stitch and attach presser
foot “J”.

Set the stitch length to 4.0 mm (approx.
3/16 inch) and loosen the upper thread
tension to approximately 2.0 (see “Setting
the Stitch Length” on page 67 and “Setting
the Thread Tension” on page 67).

Pull the bobbin and upper threads out by
50 mm (approx. 1-15/16 inches).

Sew the seams, leaving approximately
10 mm (approx. 3/8 inch) between the
seams, then trim excess thread, leaving
50 mm (approx. 1-15/16 inches).

a Approximately 10 mm (approx. 3/8 inch)

Pull the bobbin threads to obtain the
desired amount of gather, and then smooth
the gathers by ironing them.

Select

or .

Memo

• For details on each stitch, refer to the

“STITCH SETTING CHART” at the end of
this manual.