Справочник Пользователя для Brother 882-W02

Embr
oi

de
ry

229

■ Bobbin Thread is Too Loose

Bobbin thread appears slightly on the right side of 
fabric.

a Right side
b Wrong side

If this occurs, turn the slotted screw (-) clockwise, 
being careful not to over-tighten the screw, 
approximately 30-45 degrees to increase bobbin 
tension.

■ Bobbin Thread is Too Tight

Upper thread on the right side of fabric seems to be 
lifting/looping and bobbin thread is not seen on the 
wrong side of fabric.

a Right side
b Wrong side

If this occurs, turn the slotted screw (-) 
counterclockwise, being careful not to over-loosen 
the screw, approximately 30-45 degrees to decrease 
bobbin tension.

The automatic thread cutting function 

 will 

cut the thread at the end of sewing each color. 
This function is initially turned on. To turn this 

function off, press 

 key and then 

. This 

function can be turned on or off during 
embroidering.

*

This setting returns to its default 

 

when the machine is turned off.

a

b

o The key will display as 
*

When one color thread is sewn, the machine will 
stop without cutting the thread.