Справочник Пользователя для Brother 882-W07

SEWING THE STITCHES

128

Smocking Stitches

Use smocking stitches for decorative sewing on
clothes, etc.

Select a straight stitch and attach presser
foot “J”.

Set the stitch length to 4.0 mm (approx.
3/16 inch) and loosen the upper thread
tension to approximately 2.0 (see “Setting
the Stitch Length” on page 79 and “Setting
the Thread Tension” on page 79).

Pull the bobbin and upper threads out by
50 mm (approx. 1-15/16 inches).

Sew the seams, leaving approximately
10 mm (approx. 3/8 inch) between the
seams, then trim excess thread, leaving
50 mm (approx. 1-15/16 inches).

a Approximately 10 mm (approx. 3/8 inch)

Pull the bobbin threads to obtain the
desired amount of gather, and then smooth
the gathers by ironing them.

Select

or .

Sew the spaces between the straight seams.

Pull out the straight stitch threads.

Fagoting

When there is a space between two fabrics with
thread sewn over the space to join the fabrics
together, it is called fagoting. Use this stitch when
sewing blouses or children’s clothes.

Baste two pieces of fabric onto thin paper,
leaving a space of 4 mm (approx. 3/16 inch)
between the fabrics.

If you draw a line down the middle of the thin paper
or water-soluble stabilizer, sewing is easier.

a 4.0 mm (approx. 3/16 inch)
b Paper

c Basting stitches

Select

or .

Memo

• For details on each stitch, refer to the

“STITCH SETTING CHART” at the end of
this manual.

Memo

• For details on each stitch, refer to the

“STITCH SETTING CHART” at the end of
this manual.