Справочник Пользователя для Brother 882-W07
VARIOUS EMBROIDERING FUNCTIONS
304
n
With the machine threaded using the thread
for the outline from step
for the outline from step
l
, sew the outline
(APPLIQUE).
a Outline of appliqué piece
o
After embroidering is finished, remove the
stabilizer material from the embroidery
frame.
stabilizer material from the embroidery
frame.
p
Use scissors to cut the excess water-soluble
stabilizer from outside the appliqué outline.
stabilizer from outside the appliqué outline.
q
Soak the appliqué piece in water to dissolve
the water-soluble stabilizer.
the water-soluble stabilizer.
r
Dry the appliqué piece, and then iron it if
necessary.
necessary.
■ Using a Frame Pattern for the Out-
line
Using a frame pattern, the desired shape can be
added as the outline of the appliqué.
added as the outline of the appliqué.
a
Perform the operations described in steps
a
through
d
of “Creating an Appliqué
Piece” on page 300.
b
Select the desired frame shape and pattern,
and add it to the appliqué pattern.
and add it to the appliqué pattern.
Memo
• The outline is sewn using satin stitching.
• Some glue may get onto the presser foot,
needle, and needle plate at this time. Finish
embroidering the appliqué pattern, and then
clean off the glue.
embroidering the appliqué pattern, and then
clean off the glue.
Note
• Do not apply a strong force when ironing,
otherwise the stitching may be damaged.