Справочник Пользователя для Brother 882-W07
LOWER THREADING
52
f
Pass the thread through the thread guide.
a Thread guide
g
Pass the thread around the pre-tension disk
making sure that the thread is under the
pre-tension disk.
making sure that the thread is under the
pre-tension disk.
a Thread guide
b Pre-tension disk
b Pre-tension disk
h
Follow steps
g
through
k
on page 50
through 51.
■ Using the Spool Stand
To wind thread on the bobbin while the spool stand
is installed, pass the thread from the spool through
the thread guide on the telescopic thread guide, and
then wind the bobbin according to steps
is installed, pass the thread from the spool through
the thread guide on the telescopic thread guide, and
then wind the bobbin according to steps
e
through
k
of “Using the Supplemental Spool Pin”on
page 49 to page 51.
Memo
• See page 21 to assemble the spool stand.
• See page 63 to thread the machine using
the spool stand.
CAUTION
• When winding thread on the bobbin, do not
cross the bobbin winding thread with the
upper thread in the thread guides.
upper thread in the thread guides.