Справочник Пользователя для Brother 882-S90/S91
LOWER THREADING
22
d
Push the spool cap onto the spool pin as far
as possible, then return the spool pin to its
original position.
as possible, then return the spool pin to its
original position.
e
Holding the thread with your hands, slide
the thread into the grooves on the thread
guide plate.
the thread into the grooves on the thread
guide plate.
a Thread guide plate
f
Pass the thread through the thread guide.
a Thread guide
g
Pass the thread under the pin. Then pass the
thread around the pretension disk making
sure that the thread is under the pretension
disk.
thread around the pretension disk making
sure that the thread is under the pretension
disk.
a Thread guide
b Pin
b Pin
c Pretension disk
h
Follow steps
g
through
j
on page 20
through 21.
Setting the Bobbin
Press
→
→
→
in that order to display a video example of
the operation on the LCD (see page 18). Follow
the steps explained below to complete the
operation.
the steps explained below to complete the
operation.
a
Press the “Presser Foot Lifter” button to
raise the presser foot.
raise the presser foot.
b
Slide the bobbin cover latch to the right.
a Bobbin cover
b Latch
b Latch
→ The bobbin cover opens.
c
Remove the bobbin cover.
d
Hold the bobbin with your right hand and
hold the end of the thread with your left
hand.
hold the end of the thread with your left
hand.
a
a
a
b
CAUTION
• Use a bobbin thread that has been correctly
wound. Otherwise, the needle may break or
the thread tension will be incorrect.
the thread tension will be incorrect.