Справочник Пользователя для Brother 882-S90/S91
CHANGING THE NEEDLE
34
CHANGING THE NEEDLE
a
Press the “Needle Position” button to raise
the needle.
the needle.
b
Press .
→ The key appears as
.
c
Use the screwdriver to turn the screw
toward the front of the machine and loosen
the screw, then remove the needle.
toward the front of the machine and loosen
the screw, then remove the needle.
CAUTION
• Always press
on the screen before changing the needle. If
is not pressed and the Start/
Stop button or another operation button is pressed accidentally, the machine will start and injury may
result.
result.
• Use only sewing machine needles made for home use. Other needles may bend or break and may cause
injury.
• Never sew with a bent needle. A bent needle will easily break and may cause injury.
Memo
To check the needle correctly, place the flat
side of the needle on a flat surface. Check the
needle from the top and the sides. Throw
away any bent needles.
side of the needle on a flat surface. Check the
needle from the top and the sides. Throw
away any bent needles.
a Parallel space
b Level surface (bobbin cover, glass, etc.)
b Level surface (bobbin cover, glass, etc.)
b
a
Note
• Do not apply pressure to the needle clamp
screw. Doing so may damage the needle or
machine.
machine.