Краткое Руководство По Установке для Brother MFC-J4710DW

Windows

Wired Network

Choose Wired Network Connection
(Ethernet), and then click Next.

When this screen appears, choose Change
the Firewall port settings to enable network
connection and continue with the
installation. (Recommended) and click Next.

If you are using a firewall other than the
Windows

Firewall or the Windows

Firewall is

off, this screen may appear.

See the instructions provided with your firewall
software for information on how to add the
following network ports.



For network scanning, add UDP port 54925.



For network PC-Fax receiving, add UDP port
54926.



If you still have trouble with your network
connection, add UDP ports 137 and 161.

The installation of the Brother drivers will
automatically start. The installation screens
appear one after another.

If Environmental Advice for Imaging
Equipment screen appears, click Next.

When the On-Line Registration screen is
displayed, follow the on-screen instructions.
Click Next.

If you do not want to set your machine as the
default printer, uncheck Set as Default Printer
and click Next.

NOTE

• If there is more than one machine connected to

the network, choose your machine from the list,
and then click Next.
This window will not appear if there is only one
machine connected to the network, the
machine will be chosen automatically.

• If your machine is not found over the network,

the following screen will appear.

Confirm your settings by following the
on-screen instructions.

IMPORTANT

DO NOT cancel any of the screens during the
installation. It may take a few seconds for all
screens to appear.

NOTE

For Windows Vista

and Windows

7, when the

Windows

Security screen appears, click the

check box and click Install to complete the
installation correctly.