Справочник Пользователя для Beko 26WLZ530HID

22

You can not access the 

Country option from 

the Options menu. The country selected 

during the initial use will automatically 

displayed in the menu.

In the Options menu, you can set the 

Mode tab to On/Off by pressing the Right/

Left buttons. When the Game Mode is set to 

On, display settings will return to the default 

values.

Game Mode becomes active only for PC, 

HDMI and YPBPR sources. When the Game 

Mode is set to ON for these sources, picture 

mode in the Picture menu will switch to the 

Game Mode. Only colour temperature and 

backlight settings can be changed in this 

mode. Game Mode provides a considerable 

increase in the picture quality when the TV is 

used as a monitor for game consoles and for 

displaying the text files. It is advised to turn 

this mode off when you would like to watch a 

movie from the above mentioned sources.

When a new software is found through OAD 

(On Air Download) from this menu, it will 

be installed automatically. Select Software 

Update tab and press the OK button. Your 

television will start to search for a new 

software and perform the software install 

process if a new software exists.
Note: Software Update tab is not displayed in 

the Analogue mode.

You can set the Decoder Setting tab to 

Off by pressing the Right/Left movement 

buttons. When it is set to 

ON, RF signal 

will be output from the SCART output. This 

option must be set to ON when a Decoder 

is connected to SCART. When this option 

is set to 

OFF, RF signal will not be output 

from the SCART output. This option appears 

in the menu when the Signal Source is set 

to SCART. It is not displayed in the menu in 

other options.

PARENTAL CONTROL

Lock System

Off

Set PIN
Block Programme
Parental Guidance

Off

Select

Back

Exit

Panel Lock

Off

In the Parental Control menu, you can 

preclude channels that are not appropriate for 

children and set age restriction for programs 

being broadcasted. Password screen will be 

displayed when entering this menu. The menu 

will open only when the correct password is 

entered. The default password is set as 

0000. 

You can change the password from the Set 

PIN menu as you wish.

When the Lock System feature is set to 

On , 

a password is prompted if you want to enter 

in the 

Auto Tuning, Digital Manual Tuning, 

Analogue Manual Tuning submenus in the 

Channel Setup menu and the Program 

Table menu. These menus are not accessible 

unless the correct password is entered.

You can change your Parental Control 

password from this menu as you wish. To do 

this, select 

Set PIN tab and press OK button. 

Set PIN menu will be displayed. Once you 

enter your new password two consecutive 

times, your password will be changed.

With the Block Program feature, you can 

lock the desired channel and prevent it from 

being viewed unless the correct password 

is entered. To do this, select 

Programme tab from the Parental Control 

menu by pressing the 

UP/Down movement 

buttons and confirm your selection with 

OK button. Block Programme menu will 

be displayed. Select the channel you want