Справочник Пользователя для Beko 26WLZ530HID

29

For your LCD-TV to switch to the monitor (PC) mode, press the 

SOURCE button on your 

remote control. 

SOURCE menu will be displayed. Select PC by pressing the Up/Down 

movement buttons and press the 

OK button.

Enter into the 

SETUP menu from the Main Menu by pressing the MENU button in the PC 

mode. In order to make the necessary settings in this menu, you can select the headings with 

the 

Up/Down buttons on your remote control to perform the following monitor-related settings.

The most suitable geometric settings in accordance with the entry mode are configured by this 

function. For this operation, just select the  

Autoposition tab and press OK button.

9.7.5-Horizontal Position: Horizontal position setting.
9.7.6-Vertical Position: Vertical position setting.
9.7.7-Size: This is the pixel clock frequency. User can narrow down or enlarge the display by 

selecting a desired value.
9.7.8-Phase: Using the Right/Left movement buttons, you can ensure that the colours and 

shapes are exactly consolidated on the PC image.

You can select the PC image to be displayed in 16:9 or 4:3 formats.

CI module and Smart card allows you to view some scrambled (paid) channels in Digital 

TV mode. When no CI module is inserted in your television, you can only view the current 

unscrambled digital/analogue channels.

You can not use the smart card in your television independently. You will need a CAM module 

to use the smart card. Insert your smart card into the CAM module and then insert the CAM 

Module into the CI slot on your television. When you insert the module correctly, 

Inserted appears on the screen and the menu for this module is displayed.

When removing the Smart card, make sure that you pull the CAM module out completely with 

the card inserted. 

CA Module Inserted will appear on the screen.

Rear or side view of the TV