Справочник Пользователя для Barco Nio Fusion 4MP

Display information

18

To display the OSD (on-screen display). In the OSD, this button 
acts as Enter button to make selections.

To put the display in standby mode.

Indicates the display’s power status.

Green: Display is on (when enabled in the OSD).

Orange: Display is in Standby power-saving mode.

Off: Display is disconnected from the power or the LED’s on state 
is disabled in the OSD.

Note: When the LED is disabled in the OSD, it will still be 
activated (green) when the display is on but does not receive 
any video signal.

When the OSD is not on the screen, touch any of the soft touch 
keys.

The front illumination is switched on for about 10 seconds.

While the illumination is on, touch the Enter 

 

touch key to 

display the main menu. It contains several submenus.

To open a submenu, use the Up 

 

or Down 

 

touch keys to 

select the submenu. Next, press the Enter 

 

touch key to open 

the submenu.

To exit from a submenu, use Up 

 

or Down   to select EXIT. 

Next, press Enter 

.

If you exit from the Main Menu, you exit the OSD.

To change an adjustment value or setting, use Up 

 

or Down 

 

to select the adjustment or setting. Next, press  Enter 

 to go