Справочник Пользователя для Brother TD-2020
Using the Label Peeler (Optional:PA-LP-001) (TD-2120N/2130N only)
107
13
c
Insert the RD Roll so that the labels feed
with the side to be printed on facing up
(1), as shown.
with the side to be printed on facing up
(1), as shown.
d
While lifting up the media guide
adjustment lever (1), push in both media
guides (2) to fit the width of the paper.
adjustment lever (1), push in both media
guides (2) to fit the width of the paper.
e
Feed the end of the RD Roll under the
media tip guides (1).
media tip guides (1).
Use RD Rolls with a maximum outer
dimension of 5" (127 mm) or less.
Use RD Rolls designed for TD
series printers. Regardless of the
size, some RD Rolls may not be
usable.
dimension of 5" (127 mm) or less.
Use RD Rolls designed for TD
series printers. Regardless of the
size, some RD Rolls may not be
usable.
Insert the RD Roll facing the correct
direction. If the RD Roll is not
inserted correctly, the printer will not
print on the correct side of the paper
or label.
direction. If the RD Roll is not
inserted correctly, the printer will not
print on the correct side of the paper
or label.
When using media with the labels
rolled up on the inside, insert the roll
in the opposite direction of that
shown in step c so that the print
side of the labels will face up.
rolled up on the inside, insert the roll
in the opposite direction of that
shown in step c so that the print
side of the labels will face up.
1
1
2
1