Справочник Пользователя для Brother TD-2020

Chapter 3

(TD-2120N/2130N only)
Specify wired LAN, wireless LAN and 
Bluetooth communication settings. The 
wireless LAN and Bluetooth connections 
can be used only if the corresponding 
optional unit is attached to the printer and 
connection settings are completed.

Specify printer device settings, such as 
power settings and print settings. 
Settings can also be specified for the 
touch panel display (TD-2120N/2130N 
only).

Specify P-touch Template settings.

Add media information and settings to 
the printer driver in order to use a size not 
listed in the [Paper Size] list of the printer 
driver.

Closes the window.

c

Check that the printer to be configured 
appears beside [Printer]. If a different 
printer is displayed, select the desired 
printer from the drop-down list.

If only one printer is connected, it is 
unnecessary to make a selection since 
only that printer will appear.

 

d

Select the item for the settings to be 
specified, and then specify or change 
the settings in the dialog box that 
appeared.
For details on the settings dialog boxes, 
see Communication Settings 
(TD-2120N/2130N only) on page 27, 
Device Settings on page 34, P-touch 
Template Settings on page 41 or Paper 
Size Setup on page 44.

e

After changing the settings, click 
[Apply] - [Exit] in the settings dialog box 
to apply the settings to the printer.

f

Click [Exit] in the main window to finish 
specifying settings.

In order to open [Communication 
settings], you must be logged on with 
administrator rights.

In order to open [Device settings], you 
must be logged on with administrator 
rights.

In order to open [Paper Size Setup], 
you must be logged on with 
administrator rights.

Use the “Printer Setting Tool” to 
configure the printer only when the 
printer is in standby. The printer may 
malfunction if you attempt to configure it 
while it is handling a job.