Справочник Пользователя для Brother TD-2020

Chapter 3

• Only personal security authentication settings 

(open system, public key authentication and 
WPA/WPA2-PSK) can be imported. Enterprise 
security authentication (such as LEAP and 
EAP-FAST) and WPA2-PSK (TKIP) settings 
cannot be imported.

• If multiple wireless LANs are enabled for the 

computer being used, the first wireless settings 
(only personal settings) that are detected will 
be considered for the import data.

• Only settings (communication mode, SSID, 

authentication method, encryption mode and 
authentication key) from the [Wireless LAN] 
tab - [Wireless Settings] pane can be 
imported.

 



Select a Profile to import
Imports the exported file and applies the 
settings to a printer.
Click [Browse] to display a dialog box for 
browsing for the file. Select the file to be 
imported. The settings in the selected file 
appear in the settings display/change area. 

• All settings, such as wireless settings or 

TCP/IP settings, can be imported. However, 
node names cannot be imported.

• Only profiles that are compatible with the 

selected printer can be imported.

• If the imported profile’s IP address is set to 

[STATIC], change the IP address of the 
imported profile, if necessary, so that it does 
not duplicate the IP address of an existing 
printer on the network whose settings have 
been completed.

 

Saves the current settings in a file. 

If the [Disable these settings] check box is 
selected, the settings in that tab are not saved.

 

applying new settings
If this check box is selected, the printer 
automatically restarts after communication 
settings are applied.
If this check box is cleared, printers must be 
manually restarted.

When configuring multiple printers, you can 
reduce the time required to change settings by 
clearing this check box. In this case, we 
recommend selecting this check box when 
configuring the first printer so that you can 
confirm that each setting is operating as 
intended.

 

printer, and retrieves the current settings.
If this check box is selected and a printer is 
connected to the computer, the printer is 
automatically detected and the printer’s current 
settings are displayed in the [Current Status] 
pane.

If the model of the connected printer is different 
than that of the printer shown in the [Printer] 
drop-down list, the settings available on all tabs 
change to match the connected printer.

 

Name
Allows each node name to be changed.

Returns the communication settings to their 
factory defaults.

Displays the Help.

Displays the version information.

Exported files are not encrypted.