Справочник Пользователя для Brother TD-2020

Chapter 3

Select the printer’s command format.
Available settings: [Raster], [ESC/P], [P-touch 
Template]

Select the printing orientation.
Available settings: [Normal], [Inverted 180 
Degrees]
This setting is applied only if the printer driver 
is not used. If the printer driver is used, the 
setting specified in the printer driver will be 
applied.

Select the printer’s print quality.
Available settings: [Quality], [Speed]

[Print Priority] can also be changed using the 
printer driver, however, the setting will be 
erased when the printer is turned off. If the 
setting is changed using this tool, it will be 
retained even when the printer is turned off. 
Therefore, if you plan on printing without using 
the printer driver, use this tool to change this 
setting.

 

Adjust the printer’s printing density.
Available settings: -5–+5

is Closed
Select whether or not the paper is 
automatically fed when the cover is closed.
Available settings: [Feed], [Do not Feed]

Adjust the position of the reference point (point 
of origin for printing). This corrects printing 
misalignments resulting from differences in 
printer models or from the fixed margins of 
some applications.
The reference point cannot be adjusted for 
raster printing.

Adjust the tear bar tear off position for paper 
media.
Available settings: -0.39" to 0.39" (-10.0 mm to 
10.0 mm)

 

When this check box is clicked, 

 appears 

in the tab, and the settings can no longer be 
specified or changed.

The settings in a tab where 

 appears will 

not be applied to the printer even if [Apply] is 
clicked. In addition, the settings in the tab will 
not be saved or exported when the [Save in 
Command File] or [Export] command is 
executed.
To apply the settings to the printer or save or 
export them, be sure to clear the check box.

Select the operation that is performed when 
the   (Print) button is pressed.
If [Program Settings] is selected, click the 
[File] button and select the command file.
Available settings: [Print Template], [Printer 
Information Report], [Disable Key], 
[Program Settings]

Select which sections are printed when printing 
the printer setup information.
Available settings: [All], [Usage Log], [Printer 
Settings], [Printer Transfer Data]
(See Printing the Printer Setup Information 
on page 19)

1

2

3

4

5

6