Справочник Пользователя для Brother TD-2020

Installing the Printer

Driver and Software

The printer driver and software can be
installed using any of the following three
method.



USB cable connection



Wired LAN connection (TD-2120N/2130N
only)



Wireless LAN connection
(TD-2120N/2130N only) (if the WLAN
interface is attached)

The following describes the procedure for
making a wireless LAN connection.

Before specifying settings, see Installing the
Printer Driver and Software on page 4 and
Installer Screen on page 5.

To make a USB cable connection or wired
LAN connection, see USB Cable Connection
on page 5 an d Wired LAN Connection
(TD-2120N/2130N only) on page 7.

Before Making a Wireless LAN
Connection

In order to use a wireless LAN connection,
the WLAN interface (optional) must be
attached to the printer. For details on
attaching the WLAN interface (optional), see
its instruction manual.

Required Devices and Network
Configuration

This section provides a description of the
procedure for making a connection in the
following network configuration
(infrastructure mode).



Infrastructure mode

1 WLAN access point/router

2 This printer

3 Wireless-capable computer

connected to the access point/router

4 Wired computer

connected to the access point/router

5 Mobile phone, such as a smartphone

Using the WLAN Interface

(Optional:PA-WI-001)

(TD-2120N/2130N only)

Before making a wireless LAN
connection, make sure that the network
cable is not connected to the printer.