Справочник Пользователя для Barco Coronis Fusion MDCC 6130

General tips

62

• If one display from a multi-head system exhibits problems, try 

to eliminate the problem by switching video cables or power 
supplies. In that way you can find out if the problem resides in 
the display or not.

Possible causes:

• Power is not properly connected
• Video cable is not properly connected
• Video cable is bad
• Display is switched off - activate the power button to switch it 

on

• PC is started up while the display was not connected - reboot 

the PC while all displays are connected

• Graphic board resolution is too high or too low
• Two displays with different resolution are connected to the 

same graphic board

• One of the heads of the graphic board is not attached in the 

display properties control panel

• PC is in stand-by mode