Инструкции Пользователя для Brother FAX 2750

C H A P T E R O N E

After programming your Station ID, please fill out the TEST SHEET
included with your fax machine and fax it to Brother’s Automated Fax
Response System as your first transmission. This will verify that your fax
machine is properly installed.

When this document is received a confirmation sheet will be sent back to
your machine. To get a response, be sure to set up your Station ID.

USA:      1-908-685-9283 (fax)

If you’re a first-time fax machine user, fax operation might seem a little
mysterious. Soon, you’ll recognize the unusual fax tones on your phone
line, and be able to send and receive faxes easily.

When someone is sending a fax, the fax machine sends fax calling tones,
(CNG tones) — soft, intermittent beeps at 4-second intervals. You’ll hear
them when you dial and press 

Start

, and they continue for about 40 seconds

after dialing. During that time, the sending machine must begin the
“handshake” with the receiving machine. Each time you use automatic
procedures to send a fax, you are sending CNG tones over the phone line.
You’ll soon learn to listen for these soft beeps each time you answer a
phone on your fax line, so you can know if you are receiving a fax message.

The receiving fax responds with fax receiving tones—loud, chirping sounds.
A receiving fax chirps for about 40 seconds over the phone line, and the
screen displays RECEIVING. If your fax machine is set to the FAX mode, it
will answer every call automatically with fax receiving tones. Even if the
other party hangs up, your fax machine continues to send the “chirps” for
about 40 seconds, and the screen continues to display RECEIVING. To
cancel the receiving mode, press 

Stop

.