Справочник Пользователя для Brother FAX 1030e

You need to determine how long the machine will give its special F/T pseudo-ring when you have a 
voice call. This ringing happens after the initial ringing from the phone company. Only the machine 
rings for 20, 30, 40, or 70 seconds; no other phones on the same line during the special F/T 
pseudo-ring.

Press Menu/Set, 2, 2.

Press 

 or 

 to select how long the machine will ring to alert you that you have a voice 

call, and press Menu/Set when the screen displays your selection.

Press Stop/Exit.

Please note that some faxes cannot be received automatically in F/T mode, because some fax 
machines do not send the standard Group 3 calling tone (“CNG”)

, but this is not common.

This is the announcement played by your machine (not an external TAD) when someone calls and 
your machine is set to F/T mode. Although callers hear your announcement, they cannot leave a 
message. See Erasing the Outgoing Message (OGM), page 62 for directions to erase the 
announcement.

Press Menu/Set, 8, 3. The screen prompts you to choose F/T MESSAGE, TAD MESSAGE 
or PAGING MSG..

Press 

 or 

 to select F/T MESSAGE, and press Menu/Set.

Press 

 or 

 to select RECORD MSG and press Menu/Set, then pick up the handset to 

record a message.

Replace the handset. Your announcement is played.

Press Stop/Exit.

For example, you can leave a message that says:

“Hello, please wait, we are trying to connect you. If you wish to send a fax, please wait until you 
hear a fax tone and press the Start key, or, press 

 5 1 (your three-digit remote activation code) and 

press the Start key.”

Even if the caller hangs up during the F/T pseudo-ringing, the machine continues 
the F/T pseudo-ringing for the set time. 

It is not necessary to have an outgoing message. The F/T mode will work fine 
without one. It is only to help the caller understand the status of your machine.