Справочник Пользователя для Brother QL-650TD

Introduction

8

•

The cutter unit contains a very sharp blade. To 

prevent injury from a broken cutter blade: 

• Make sure the top cover is closed when using 

the cutter unit.

• Don't apply too much pressure when fitting or 

removing the cutter unit.

• When the cutter unit becomes blunt you should 

replace it with a new one.

• If you break the cutter unit, unplug your printer 

from the power and remove the cutter unit 

carefully with a pair of tweezers.

•

If the machine jams due to a build up of adhesive, 

you should clean the surface of the paper guide. 

Unplug the printer from the power and wipe away 

the adhesive build up from the surface of the 

paper guide using a cloth or tissue dipped in isopropyl alcohol. We recommend that you 

clean the paper guide when replacing the cutter unit.

•

The cutter unit should give you an average number of 5,000 cuts or more, depending on 

how you use the machine. If your printer does not cut the labels properly or starts to jam 

often, the cutter might have reached the end of its life; you should replace the cutter. 

Paper guide surface