Справочник Пользователя для Brother QL-650TD

37

STEP

1

STEP

2

STEP

3

When glue is attached to the label 

outlet (metallic plate part and resin 

guide part) and the printer damages 

the label, pull out the power plug from 

the outlet and clean the label outlet 

with a cloth dipped into ethanol or 

isopropyl alcohol.

It is recommended to clean the label 

outlet when replacing the cutter unit.

Insert edge (A) of the cleaning sheet into the printing unit and guide 

it out to just in front of the cutter.

•

Do not remove part (A) of the cleaning sheet.

•

The printed side of the cleaning sheet should be facing upwards.

After inserting the cleaning sheet into the 

printing unit, push down the roll release lever 

and remove the part B of the cleaning sheet.

Close the DK Roll cover and turn ON the power to the printer.

Press the Feed button 

(

)

 for more than one 

second.

The roller rotates for 100 mm.

The adhesive face of the cleaning sheet removes any 

stains or dust on the roller.

•

If you do not press the Feed button for more than 

one second, the roller rotates for only 8 mm.

•

Dispose of the cleaning sheet after use.

Feed button

Label outlet