Справочник Пользователя для Brother pt-h300

1

2

3

4

5

6

7

8

9

z

Adjusting the Label Length

You can adjust the length of the printed label in levels of -5 to +5.

Press the Menu key to display the setup menu, select "Adjustment" using the   or   
key, and then press the OK or Enter key.

Select "Label Length" using   or   key and set the value 
using  

or  

key.

Press the OK or Enter key to apply the setting.

If necessary, trim the printed label to the desired shape and length using scissors, etc.

Peel the backing from the label.

Position the label and then press firmly from top to bottom with your finger to attach 
the label.

Chain

• Use this setting when printing several labels 

with minimum margins.

• Feed the tape before using the cutter. 

Otherwise a part of the text may be cut off. Do 
not try to pull the tape since this may damage 
the tape cassette.

• After pressing Print, “OK to Feed?” appears.

Press the Escape key to enter more texts or 
press the OK or Enter key to feed. 

• The final label is printed with an 0.37" (9.5 

mm) margin to the right of the characters. Use 
scissors to cut off any part of this margin that 
is not required.

ABC

ABC

*Feed the tape before 

using the cutter.

0.37"

(9.5 mm)

• Press the Escape key to return to the previous step.

• Press the Space key to set the value to default setting.

• Approximately 1% of the total label length will be adjusted by 1 level.