Справочник Пользователя для Brother P-touch RL-700S

13

Before using your machine

The ON/OFF button lamp (blue) and Error lamp (red) indicate the current operating status. 

ON/OFF button (

)

Turns the printer on and off. 

Feed and Cut button (

)

Feeds and cuts the printed labels.
Use this button when the auto cut option in the printing dialog 
box is not checked. 

* Feed and cut does not function when SZ tapes are 

loaded.

Open Cover button

Opens the cover. 

Off

Off

• The printer is off. 

On

Off

• The printer is working normally. 

Flashing

Off

• The printer is receiving data from the computer.

Flashing

On

• The printer is receiving data from the computer, but unable 

to print. 
Load a tape cassette and close the cover. 

On

On

• No tape cassette is loaded, or the cover is open. 

Load a tape cassette and close the cover. 

• The Feed and Cut button was pressed when SZ tape is 

loaded. (Unable to use the Feed and Cut button when SZ 
tape is loaded.)

• You reached the end of the SZ tape. Remove the SZ tape 

cassette and check the surface of the tape.  If "END" is 
printed on the tape, replace the cassette with a new SZ 
tape cassette. 

On

Flashing

• A print job is received, but the printer cannot print. Load the 

correct tape cassette and close the cover. 

• If ERROR is printed on the SZ tape, an error occurred 

when writing data to the RFID tag or the tag is damaged. 
Try printing again. 

On

Flashing 

Rapidly

• Make sure that the tapes are not jammed in the printer. 

Turn the printer off and on. 

* If the problem is not solved, contact your dealer or 

authorized service center. 

On

Flashing Very 

Rapidly

• Turn off the printer, and then turn it on again. 
* If the problem is not solved, contact your dealer or 

authorized service center.