Справочник Пользователя для Brother P-TOUCH 7600
15
La
be
l T
y
pe
M
ode
s
Flag Mode
Labels printed using this Label Type mode can be wrapped
around cable or wire with the ends stuck together to form a
flag. With the FLAG Label Type mode, each block of text
is printed at both ends of separate labels. The length of the
unprinted part of this label is equal to the circumference of
the cable or wire. In addition, the text can be printed
horizontally or rotated 90°.
around cable or wire with the ends stuck together to form a
flag. With the FLAG Label Type mode, each block of text
is printed at both ends of separate labels. The length of the
unprinted part of this label is equal to the circumference of
the cable or wire. In addition, the text can be printed
horizontally or rotated 90°.
After selecting the FLAG Label Type mode, specify the length and diameter of the flag,
a frame style if desired, and whether or not to rotate the text.
a frame style if desired, and whether or not to rotate the text.
●
FLAG (flag diameter):
0.0 to 100.0 mm
Default: 7.0 mm
Default: 7.0 mm
●
FLAG LEN (flag length):
10.0 to 200.0 mm
Default: 30.0 mm
Default: 30.0 mm
●
FRAME:
OFF, , , ,
Default: OFF
Default: OFF
●
ROTATE:
OFF, ON
Default: OFF
Default: OFF
☞ A single block of text can contain a maximum of 7 text lines.
☞ For labels to be attached to cables and wires, we recommend using Flexible ID Tape.
To wrap Flexible ID Tape around cylindrical objects, use the FLAG Label Type
mode when the diameter of the object is less than 3 mm. In addition, the flag length
should be at least 5 mm.
mode when the diameter of the object is less than 3 mm. In addition, the flag length
should be at least 5 mm.
ROTATE
set to
OFF
set to
OFF
ROTATE
set to
ON
set to
ON
Flag
length
length
Flag
diameter
diameter
Flag
length
length
Flag
length
length
Flag
diameter
diameter
Flag
length
length
1
2
3
4
PT75007600uk.book Page 15 Thursday, July 10, 2008 9:39 AM