Инструкции Пользователя для Brother SU-877A
Programmer
175
Chapter 3 Programming with Command Function
Creating double stitch
Command to be used
Creating double stitch in the reverse direction to the sewing path. Input the
width of double stitch in
width of double stitch in
.
Values 1.0 - 9.9 mm are available for the width.
Example
Width
Input
1.5 mm
215
Input the stitch length in
.
Carrying out double stitch on the left side to the sewing path.
Carrying out double stitch on the right side to the sewing path.
Starting double stitch calculations.
(This is the end code. Refer to page 181 for details.)
(This is the end code. Refer to page 181 for details.)
If sharp angles or fine curves are included in the pattern sheet, the desired double stitch may not
be achieved.
1.
Select the sewing start position with
and press
.
2.
Determine the width and input
.
3.
Move the needle with
to select the second point, then press
.
4.
Move the needle to the corner point and input
.