Краткое Руководство По Установке для Brother MFC-440CN
Setting Up the Machine
8
STEP1
Improper Setup
DO NOT touch the area shown in the
illustration below.
illustration below.
Note
If the protective yellow cap comes off when you
open the bag, the cartridge will not be damaged.
open the bag, the cartridge will not be damaged.
6
Install each ink cartridge in the direction of the
arrow on the label.
Take care to match the color of the lock release
lever (1) with the cartridge color (2), as shown
in the diagram below.
arrow on the label.
Take care to match the color of the lock release
lever (1) with the cartridge color (2), as shown
in the diagram below.
7
Lift each lock release lever and gently push it
until it clicks, and then close the ink cartridge
cover.
until it clicks, and then close the ink cartridge
cover.
Note
If the LCD prompts you to re-insert the ink
cartridge correctly, after you install the ink
cartridges, check that the ink cartridges are
installed properly.
cartridge correctly, after you install the ink
cartridges, check that the ink cartridges are
installed properly.
The machine will clean the ink tube system for
use for the first time. This process will occur
only once, the first time ink cartridges are
installed. The cleaning process will last
approximately four minutes.
The LCD shows:
use for the first time. This process will occur
only once, the first time ink cartridges are
installed. The cleaning process will last
approximately four minutes.
The LCD shows:
Cleaning
i i i i i
i i i i i
Preparing System
Approx 4 Minutes
Approx 4 Minutes
1
2
M
brother
XXXX