Брошюра для Britax Multi-Tech BB0-702-00

Open both lock-offs. Pull off suffi cient 
lap and diagonal belt (

). Feed the belt through the 

lock-off belt guide on the side opposite  
to the buckle and in to the belt tunnel 

. There are two access slots in 

the seat cover to aid feeding of the belt 
through the belt tunnel and underneath 
the seat cover 

.

Feed the seat belt through the belt 
tunnel and lock-off on the opposite side 
and attach the tongue into the buckle 

.

 - The child seat 

MUST

 only be used with a lap or a lap and 

diagonal seat belt (approved to UN/ECE regulation no. 16 or equivalent 
standards).

Push the vehicle front seat back to accommodate the child seat ensuring that 
any passenger directly behind will still be able to sit in a comfortable position.

With the footprop adjusted to the shortest length, place the child seat rearward 
facing with the swinging base resting against the back of the vehicle seat 

.

DO NOT

 rest the back of the child seat on the dashboard or 

close to the windscreen.

Pull all the seat belt slack through the child seat ensuring the seat belt is not 
twisted. When the belt is as tight as possible, close the lock-off on the seat belt 
buckle side, ensuring that both the lap and diagonal sections of the belt are 
secured by it 

.

Close the lock-off on the opposite side, ensuring that only the lap section of the 
belt is secured by it 

.

Ensure that both lock-offs have been clicked into place.

If the buckle now lies in the position marked as wrong with a 

 and the seat 

belt cannot be correctly tightened 

, try another seating position in the 

car.

Britax_2h.indb   12

30/10/2007   16:24:01