Справочник Пользователя для Brother 882-C50

Скачать
Страница из 312
SEWING THE STITCHES
S-38
■ Appliqué 
a
Trace the pattern onto the appliqué fabric 
and then cut around it, leaving a 3 mm to 
5 mm (approx. 1/8 inch to 3/16 inch) seam 
allowance.
a Seam allowance: 3 mm to 5 mm 
(approx. 1/8 inch to 3/16 inch) 
b
Place a piece of stabilizer cut to the finished 
size of the appliqué design onto the fabric, 
and then fold over the seam margin using 
an iron. Clip curves when necessary.
c
Turn the appliqué over, and attach the 
stabilizer with basting pins or a basting 
stitch.
d
Select 
 and attach presser foot “J”.
e
Use the quilting appliqué stitch to attach 
the appliqué. Sew around the edge while 
dropping the needle as close to the edge as 
possible.
a Appliqué
b Needle drop position
You can use the appliqué technique to attach 
appliqué designs like the three pictured below.
■ Quilting
Sewing the quilt top, batting, and backing together is
called quilting. You can sew the quilt with the 
optional walking foot to keep the quilt top, batting, 
and backing from sliding. The walking foot has a set 
of feed dogs that move together with the feed dogs 
in the needle plate during sewing.
a
Select ,  
or .
b
Attach the walking foot. (“CHANGING 
THE PRESSER FOOT” of “Basic 
operations”)
 CAUTION
• Be careful that the needle does not strike a 
basting pin during sewing. Striking a pin can 
cause the needle to break, resulting in injury.
a Dresden plate 
b Stained glass 
c Sunbonnet sue