Справочник Пользователя для Brother 882-C50
SEWING THE STITCHES
U
tility
S
S
titc
h
h
es
Sewing S-29
S
2
e
Iron the dart to one side so that it is flat.
Gathering
Use on waists of skirts, sleeves of shirts, etc.
a
Select a straight stitch and attach presser
foot “J”.
foot “J”.
b
Set the stitch length to 4.0 mm (approx.
3/16 inch) and the thread tension to
approximately 2.0 (weaker tension).
3/16 inch) and the thread tension to
approximately 2.0 (weaker tension).
*
If you press
after pressing
and then
, the stitch length will be set
automatically to 4.0 mm (approx. 3/16 inch) and the
thread tension will be automatically set to 2.0.
thread tension will be automatically set to 2.0.
c
Pull the bobbin and upper threads out by
50 mm (approx. 2 inches) (“Pulling Up the
Bobbin Thread” of “Basic operations”).
50 mm (approx. 2 inches) (“Pulling Up the
Bobbin Thread” of “Basic operations”).
a Upper thread
b Bobbin thread
c About 50 mm (approx. 2 inches)
b Bobbin thread
c About 50 mm (approx. 2 inches)
d
Sew two rows of straight stitches parallel to
the seam line, then trim excess thread
leaving 50 mm (approx. 2 inches).
the seam line, then trim excess thread
leaving 50 mm (approx. 2 inches).
a Seam line
b 10 mm to 15 mm (approx. 3/8 inch to 9/16 inch)
b 10 mm to 15 mm (approx. 3/8 inch to 9/16 inch)
c About 50 mm (approx. 2 inches)
e
Pull the bobbin threads to obtain the
desired amount of gather, then tie the
threads.
desired amount of gather, then tie the
threads.
f
Smooth the gathers by ironing them.
g
Sew on the seam line and remove the
basting stitch.
basting stitch.
Flat Fell Seam
Use for reinforcing seams and finishing edges
neatly.
neatly.
a
Select
and attach presser foot “J”.
b
Sew the finish line, then cut half of the seam
allowance from the side on which the flat
fell seam will lie.
allowance from the side on which the flat
fell seam will lie.
*
When the automatic thread cutting and automatic
reinforcement stitching are preset, reinforcement
stitches will be sewn automatically at the beginning
of sewing. Press the “Reverse Stitch” button to sew a
reinforcement stitching are preset, reinforcement
stitches will be sewn automatically at the beginning
of sewing. Press the “Reverse Stitch” button to sew a